To get the most fun out of
bigtrak
you should remember:
1. All steps except and need two or more
separate instructions.
Look at the following chart to see which other instruction is needed
each time.
2. All surfaces that you can run
bigtrak
on will be different. The numbers
you use for turns and distance will vary from surface to surface, so use
your to find the correct number to programme.
3.
bigtrak
is designed to operate on a flat surface. When
bigtrak
runs
into steep slopes or into any obstacles, such as walls or furniture it will
stall the unit. The protection device will be activated (power cut off) to
prevent the unit overheating. The unit will output the sleep mode tones
alert once and enter sleep mode. The previous program is cleared after
the protection device is activated.
4. Remember you can programme
bigtrak
with up to 16 different steps.
These can include turns of more than 360°, up to 99 lengths of travel
forwards or backwards, and up to 99 blasts of the photon beams per
step. Remember and do not count as steps.
5. We suggest that you chart out the various rooms in your house and
mark in furniture that you want to avoid. Then you can have fun
programming
bigtrak
to move from room to room around the house.
Keep notes of successful programmes so that you can use them again.
21
GENERAL OBSERVATIONS
GO
TEST
CE
CM
TEST
CE
CM
Backwards / forwards How far?
Turn
How much?
Fire
How many times?
Pause
How long?
Repeat
How many steps?
GO
