Changing Display Settings
Entering the Settings Interface
To enter the settings interface press and hold the
SET
button for 3 seconds. Exit this mode
and save your changes by holding down the
SET
button for another 3 seconds.
Reset Trip Distance
Set 1 will be displayed. Press and hold the
DOWN
button to reset the TRIP 1 distance. Press
the
SET
button again to advance to the next setting.
Change Max Speed Limit
Set 2 will be displayed. Use the
UP
and
DOWN
buttons to adjust the Max Speed limit that the
motor will accelerate up to. The motor will no longer function above this speed however you
can still go faster with the pedals. Press the
SET
button when done to save changes and
advance to the next setting.
Change Wheel Diameter
Set 3 will be displayed. This does not need to be changed unless you are switching to a
different sized wheel on your bike. Use the
UP
and
DOWN
buttons to change wheel size and
press the
SET
button to save your selection and advance to the next setting.
