39
DS440IS
DANGER
Plug any unused cable clamps.
4.5
Connection of the terminal to the platform scale
To connect the terminal to the weighing platform, the supply includes a pre-wired cable the
connector of which must be inserted into the 6-pin terminals (JCELL) (point 4 of
Figure 4.8 on page
1-36
) after having removed the protective scale input cover (point 5 of
Figure 4.8 on page 1-36
).
WARNING
The cable screen must always be earthed as explained in par. 4.4 on page 1-37.
Do not route the
connection cable to the weighing platform together with non-exi cables (i.e. those without intrinsic
safety).
