52
DS440IS
Enter/display tare
Pressing this key allows you to enter a tare value using the numeric keys
on the keypad (
par. 5.3 on page 1-52
). To change a preset tare value see
par. 6.2.11 on page 1-66.
On completion of the operation, the display will
show the net weight and tare values and illuminate the symbols
and
. The entered tare value will be automatically rounded off to
the nearest scale division. On MD terminals, the net weight will be
displayed using the division of the range within which the net weight value
falls, while on ME terminals, the net weight division shall be that of the
range within which the gross weight falls. On MD terminals, the maximum
preset tare value is limited to the maximum capacity of the first weighing
extension (indicated on the metrological data plate).
Print and/or send
Allows a weighing option to be requested. Consequently forces a weighing
data printout and/or serial transmission of a string of data via the
configured port.
Customizable keys
The functions associated with these keys are indicated on the display.
