56
DS440IS
6.
USING THE TERMINAL
6.1
GENERAL MATTERS
6.1.1
Using the keys to navigate the menus
The numeric keys
described in
par. 5.3 on page 1-52
and the
customisable keys
and
par. 5.2 on page 1-50
can be used to navigate the programming
menus.
From the normal weight display condition, you can access the menus by pressing
to select the
option
2°F
. Now use the other keys to select the next option. A maximum of 6 functions are
available on the bar of the shortcut keys. By pressing the key in correspondence with the indication
OTHERS
you can switch to other functions managed by the terminal. The arrow keys
,
,
,
allow you to move respectively up, down, right and left.
By pressing
SELECT
you can select the required option or enter a
submenu.
The keys # and \\ allow you to change the way the menu pathway is displayed : # extended pathway,
\\ pathway expressed numerically.
Selecting
ESC
returns you to the previous menu level.
By pressing
ESC
repeatedly you can therefore exit through the menus to return to the normal weight
display mode.
From here on in this manual, the instructions will only indicate the pathway without referring to the
specific keys to be pressed. For example, the instruction on how to change the contrast will be given
as follows:
2°F>CONTR>+ o ->SAVE>ESC
