63
DS440IS
Customised
Can be selected when display customising is available.
6.2.4
Memory status
If there is insufficient free memory, memory can be recovered by following the pathway:
...>MENU>Memory status
CAUTION
The memory recovery operation may require a few minutes during which time the terminal cannot
be operated. Do not switch off the terminal during this operation as this could result in the loss of
the data in memory.
6.2.5
Reprint
See par. 6.3.1 on page 1-72
6.2.6
Setting the outputs as Setpoints (if enabled)
The two available outputs may be used in setpoint mode. In this way, the output is activated when
the weight reaches the set value.
...>MENU>Data management>Set Point
(Shortcut key
SETPNT
).
Enter the required weight values as described in
par. 6.1.2 on page 1-56.
