64
DS440IS
6.2.7 Setting the outputs as ranges (if enabled)
The two available outputs may be used in Range mode. The output is activated when the weight is
within the set range; to set the range, follow the pathway:
...>MENU>Data management>Range
(Shortcut key
RANGE
).
6.2.8
Generic code
This is an alphanumeric code with a maximum of 8 characters that can be printed and/or transmitted.
The maximum of codes that can be entered varies according to the other types of data managed. To
enter a generic code follow the pathway:
...>MENU>Data management>Code management>Generic code
(Shortcut key CGEN).
Enter the alphanumeric code as described in par. 6.1.3 on page 1-56.
If the value of the generic code = empty space, it will no longer appear in the printout and will not be
used for totalization.
