65
DS440IS
6.2.9
Product code
The terminal can handle product codes, each of which can be matched to:
an alphanumerical description, which can be printed and/or transmitted along with the weight;
a preset tare (match defined during the installation phase);
from 1 to 4 set-points (match defined during the installation phase);
fall (match defined during the fall installation phase for the extraction on loading with fall
operating mode).
The product code is a numeric code of up to 6 digits while the alphanumerical description can
contain up to 20 characters. The maximum number of codes that can be entered is defined during
the installation phase. It varies, and depends on which other data must be handled.
To enter the product code, follow the pathway:
...>MENU>Data Management>Code Management>Product c.List
(
PRODC
shortcut key).
Enter the product code and the associated alphanumerical description as explained in
par. 6.1.2 on
page 1-56 and par. 6.1.3 on page 1-56.
Entry of product code 0 (zero) inhibits all totalizing
operations during the weighing phase.
