66
DS440IS
6.2.10 Product code list
By following the pathway:
...>MENU>Data Management>Code Management>Product c.List
the actual description of the code can be displayed by recalling the product code in question.
CODE
allows the operator to enter the product code and all the data associated with it. The code
entered becomes the activated element. Enter 0 to reset all the associated data and quit the list.
CANCOD
allows the operator to cancel the highlighted product code.
The element is eliminated from the list but remains activated as general data item.
ESC
is used to quit the list
produces a printout of a group of codes entered.
If the field of a tare code is highlighted, press the
key to confirm the entered code and quit the
list.
If another field is highlighted (the one with the description associated with the code for example), the
key can be pressed to modify the highlighted field.
The product code of the current element is highlighted on access to the list. The first element is
highlighted if code 0 is activated, as this is not an element of the archive.
