69
DS440IS
6.2.13 Progressive number
The terminal manages a 6-digit progressive number used to count the number of weighing
operations performed: this value starts from 1 and is automatically increased by one unit after each
print and/or weighing operation (and thus indicates the value of the next print or weighing operation).
To change the progressive number, follow the pathway:
...>MENU>Data management>Progressive
(Shortcut key
PROG.N
)
If the progressive number is set to 0 (zero), it will not be incremented and not be printed.
6.2.14 Coefficient Management
This function can be of use when the unit of measurement needs to be converted. For example, you
can calculate the number of litres if the specific weight and overall weight of a liquid are known.
Follow the following path to access this menu:
...>MENU>Data Management>Coefficient Management
(
COEF
shortcut key)
Enter the required
coefficient
, then select the required type of
operation
(
multiplication
or
division
) and the
rounding
value for the result. This latter is just a numerical value without unit of
measurement.
6.2.15 Extraction data
Data available in the extraction on loading with fall operating mode.
