73
DS440IS
6.3.1
Weighing data reprint
Access the
Reprint
item of the user menu to obtain the last printout again without having to
change the consecutive number and any totals calculated.
The word Copy will appear on the reprint to distinguish it from the original.
6.3.2
Automatic print-out
If enabled, allows automatic printing once the stable weight has been obtained. Proceed in the
following way:
Enter the weight limit beyond which the print is required, modifying the Setpoint01 value (see
par. 6.2.6 on page 1-62
).
Place the goods to weigh on the scale.
Print-out occurs when the weight value exceeds the one set for Setpoint01 and the stable weight
is obtained.
Unload the scale once the printout has terminated.
The scale will be ready for another weighing operation when the displayed weight drops below
the set limit.
Only error messages (if any) will be displayed during the printing operation.
