2. SAFETY INSTRUCTIONS
2.1 Prohibited uses
The instrument you have purchased is a weighing system and has been
designed and manufactured as such. The instrument is primarily
intended for weighing goods.
✔
It is forbidden to use the terminal without taking the necessary
precautions for safe use.
✔
Use of the terminal in places with potentially explosive atmospheres
or in areas where there is a risk of fire is strictly prohibited.
Any other use shall only be permitted if explicitly authorised by the
Manufacturer.
2.2 Regulations
The operating conditions for the electronic terminal are subject to the
regulations in force in the country in which the terminal is used. All use
of the terminal in conditions which do not comply with these regulations
is prohibited.
2.3 Prescriptions for use
✔
Strictly comply with the instructions in this manual during use.
✔
In the event of discrepancy between the information in this manual
and the instrument purchased, contact your Dealer or the
Manufacturer's After-Sales Service for explanations.
✔
Always observe the indications given on the warning and danger
plates on the terminal.
✔
Make sure that all the safety guards are in place and that the
connection cables are in a good condition and connected correctly.
✔
Make sure that the terminal is connected to an electrical outlet socket
equipped with an efficient earth connection. Make sure that the line
complies with the applicable regulations. Make sure that there is no
difference in potential between the earth and neutral conductors.
✔
If the terminal is to be connected to other devices (e.g. a computer or
other), these devices must be disconnected from the electricity main
before connection to the terminal.
RD52HL
1-13
