3. DELIVERY AND INSTALLATION
3.1 Recommendations for installation
Use the supplied brackets to fix the repeater.
Avoid direct sunlight on the display if this is installed outdoors.
3.2 Connection of the terminal to the electricity main
DANGER
Check that:
✔
the voltage and frequency of the electricity main
correspond to the indications on the warning plate affixed to
the terminal;
✔
the mains outlet socket to which the terminal is connected
is equipped with an earth;
✔
the mains outlet socket is in the immediate vicinity of the
terminal and is equipped with a disconnector switch;
✔
the warning and danger plates are affixed to the casing
enclosing the instrument;
✔
failing this, notify your maintenance personnel or contact
our Assistance Service directly.
Proceed in the following way to connect the terminal to the electricity
main in the correct way:
✔
insert the plug of the power lead into the right power socket;
✔
operate the disconnector switch.
The terminal complies with the European Directive governing
electromagnetic compatibility, however it is good practice to provide a
separate power supply line for the terminal.
RD52HL
1-15
