manualshive.com logo in svg

Billion 7800DX, User Manual

The Billion 7800DX is a versatile networking product that combines a high-performance router with advanced features. With a user-friendly interface and extensive functionality, this device allows users to effortlessly connect to the internet. Access the comprehensive user manual for free download at 88.208.23.73:8080 to unlock its full potential.

Share
Download
background image

 

126 

Failover:

 If enabled, the 3G/LTE will work in failover mode and be brought up only when there is no 

active default route. In this mode, 3G/LTE work as a backup for the WAN connectivity. While if 
disabled, 3G/LTE serves as a normal interface, and can only be brought up when it has been 
configured to achieve a mobile connectivity. 

Mode: 

There are 6 options of phone service standards: GSM 2G only, UTMS 3G only, GSM 2G 

preferred, UMTS 3G preferred, Automatic, and Use 3G/LTE 3g dongle settings. If you are uncertain 
what services are available to you, and then please select Automatic. 

TEL No.: 

The dial string to make a 3G/LTE user internetworking call. It may provide by your mobile 

service provider. 

APN: 

An APN is similar to a URL on the WWW, it is what the unit makes a GPRS / UMTS call. The 

service provider is able to attach anything to an APN to create a data connection, requirements for 
APNs varies between different service providers. Most service providers have an internet portal 
which they use to connect to a DHCP Server, thus giving you access to the internet i.e. some 3G 
operators use the APN ‘internet’ for their portal. The default value is “internet”. 

Username

/

Password: 

Enter the username and password provided by your service provider. The 

username and password are case sensitive. 

Authentication Protocol: 

Default is Auto. Please consult your service provider on whether to use 

PAP, CHAP or MSCHAP. 

PIN: 

PIN stands for Personal Identification Number. A PIN code is a numeric value used in certain 

systems as a password to gain access, and authenticate. In mobile phones a PIN code locks the 
SIM card until you enter the correct code. If you enter the PIN code incorrectly into the phone 3 times 
in a row, then the SIM card will be blocked and you will require a PUK code from your network/ 
service provider. 

 

Connect on Demand: 

If you want to make UMTS/GPRS call only when there is a packet

 

requesting access to the Internet (i.e. when a program on your computer attempts to access

 

the Internet). In this mode, you must set Idle Timeout value at same time. Click on Connect on

 

Demand, the Idle Timeout field will display.

 

Idle Timeout: 

Auto-disconnect the broadband firewall gateway when there is no activity on 

the line for a predetermined period of time. Default is 600 seconds. 

 

 

 

Keep Alive:

 Check Enable to allow the router to send message out every 7 seconds (can be 

changed base on need) to prevent the connection being dropped by ISP. 

IP Address:

 The IP address is used to “ping”, and router will ping the IP to find whether the 

connection is still on. 

       

 

 

NAT: 

Check to enable the NAT function. 

Firewall: 

Enable to drop all traffic from WAN side. If enabled, all incoming packets by default would 

be dropped, and please turn to 

IP Filtering Incoming 

to add allowing rules. 

MTU: 

MTU (Maximum Transmission Unit) is the size of the largest datagram that IP will attempt to 

send through the interface. 

Select default gateway interfaces: 

Select from the interfaces the default gateway, here commonly 

Summary of Contents for 7800DX















































































































































































































































































Reviews:

No comments

Related manuals for 7800DX

Canon MP980 series Easy Setup preview
MP980 series
Brand: Canon Pages: 4
D-Link DIR-850L Quick Install Manual preview
DIR-850L
Brand: D-Link Pages: 4
D-Link DIR-830L Quick Install Manual preview
DIR-830L
Brand: D-Link Pages: 12
D-Link DIR-803 Manual Configuration Manual preview
DIR-803
Brand: D-Link Pages: 6
D-Link DIR-640L Quick Install Manual preview
DIR-640L
Brand: D-Link Pages: 12
D-Link DIR-626L User Manual preview
DIR-626L
Brand: D-Link Pages: 140
D-Link DIR-605L Quick Install Manual preview
DIR-605L
Brand: D-Link Pages: 2
D-Link DIR-514 Faq preview
DIR-514
Brand: D-Link Pages: 48
D-Link DIR-510L Quick Install Manual preview
DIR-510L
Brand: D-Link Pages: 16
D-Link DIR-506L Configuration Manual preview
DIR-506L
Brand: D-Link Pages: 16
D-Link DIR-1750 Quick Installation Manual preview
DIR-1750
Brand: D-Link Pages: 2
D-Link DIR-822 Quick Instillation Manual preview
DIR-822
Brand: D-Link Pages: 35
D-Link DIR-2680 User Manual preview
DIR-2680
Brand: D-Link Pages: 178
Quectel EC200 Series Application Note preview
EC200 Series
Brand: Quectel Pages: 28
StarTech.com AP300WN2X2W Quick Start Manual preview
AP300WN2X2W
Brand: StarTech.com Pages: 2
CNET CAR-854 Quick Installation Manual preview
CAR-854
Brand: CNET Pages: 2
EINHELL TC-RO 850 Original Operating Instructions preview
TC-RO 850
Brand: EINHELL Pages: 32
Aruba AP-92 Installation Manual preview
AP-92
Brand: Aruba Pages: 2

Brands by name

Popular brands

Load more brands