Billion 810VGTX Router
Page | 38
The MAC Address filter supports up to 16 wireless network clients. I t a l lo w s you to manage your network to allow
traffic from authorized clients or to restrict unwanted clients from accessing your Wireless network.
There are no pre-defined MAC Address filter rules; you can add the filter rules to meet your requirements.
Wireless Client Filter: Default setting is set to ‘Disable’.
Allowed: To authorize devices to access your network by inserting the MAC Address in the space provided
or by clicking on the Candidate button. Make sure your PC’s MAC is listed.
Blocked: To prevent unwanted devices from accessing network by inserting the MAC Address in the space
provided or by clicking on the Candidate button. Make sure your PC’s MAC is not listed.
The maximum number of clients is 16. The MAC addresses are 6 bytes long; they are represented only in
hexadecimal characters. The numbers 0 - 9 and letters a - f are acceptable.
Note: Follow the MAC Address Format xx:xx:xx:xx:xx:xx. Colons ( : ) must be included.
Candidates: It automatically detects devices that are connected to the router through the Wireless access point (AP).Click
the Candidate button to access the Associated Wireless Clients window.
Associate Wireless Client: Displays a list of MAC addresses of all wireless devices that are currently connected to the
router.
You can check the checkbox next to the MAC address to block or allow the wireless client to access the network. Then
click Add to insert the Wireless Clients MAC Address into the Filter table. The maximum number of Wireless clients is
16.
