Billion 810VNTX Router
Page | 76
Password:
If you are a Dial-Out user (client), enter the password provided by your Host. If you are a Dial-In user
(server), enter your own password.
Authentication Type:
Default is Auto if you want the router to automatically determine the authentication type to use. If
you know which authentication type the server is using (when acting as a client), you may manually specify the
Authentication type whether CHAP (Challenge Handshake Authentication Protocol) or PAP (Password Authentication
Protocol). When acting as a server, you can set the authentication type you want the clients connecting to you to use.
When using PAP, the password is sent unencrypted, while CHAP encrypts the password before sending it.
Data Encryption:
Data sent over the VPN connection can be encrypted by an MPPE algorithm. Default is set to Auto, so
that this setting is negotiated when establishing a connection, you can also manually Enable or Disable the encryption.
Key Length:
The data can be encrypted by MPPE algorithm with 40 bits or 128 bits. Default is Auto, it is negotiated
when establishing a connection. 128 bit keys provide a stronger encryption than 40 bit keys.
Mode:
You may select Stateful or Stateless mode. The key will be changed every 256 packets when you select Stateful
mode. If you select Stateless mode, the key will be changed in each packet.
Active as default route:
Commonly used by the Dial-out connection where all packets will route through the VPN tunnel
to the Internet. Therefore activating this function may degrade the Internet performance.
Click Edit/Delete button to save your changes.
Example: Configuring a Remote Access PPTP VPN Dial-out Connection
An office establishes a PPTP VPN connection with a file server located at a different location. The router is installed in
the office, connected to a couple of PCs and Servers.
Summary of Contents for 810VNTX
Page 1: ......
