41
The following table describes the labels in this screen.
LABEL
DESCRIPTION
Start Port No.
Enter a port number in this field.
To forward only one port, enter the port number again in the
End Port No.
field.
To forward a series of ports, enter the start port number here and the end port number
in the
End Port No.
field.
End Port No.
Enter a port number in this field.
To forward only one port, enter the port number again in the
Start Port No.
field
above and then enter it again in this field.
To forward a series of ports, enter the last port number in a series that begins with the
port number in the
Start Port No.
field above.
IP Address
Enter your server IP address in this field.
Save
Click
Save
to save your changes back to the BIPAC-5100S.
Cancel
Click
Cancel
to return to the previous configuration.
6.6 Configuring Address Mapping
Ordering your rules is important because the BIPAC-5100S applies the rules in the order that
