Chapter 3 Configuration
13
3.2 Factory Default Settings
Before you configure this device, you need to know the following default settings.
1. Web
Configuration
Password : <BLANK>
BLANK means user does not need to input any characters.
2. Device IP Network settings in LAN site
IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
3. ISP setting in WAN site
Obtain an IP address automatically
4. DHCP
server
DHCP server is enabled.
IP address pool from IP Address: 192.168.1.100 to IP Address: 192.168.1.199
3.2.1 Password
The password is left blank as the default setting. When configuring your router with Web
browser, just click
“OK”
, and then you are logged in for the first time. It is recommended that
you set a password for security and management purpose. BIPAC 6600 maintains the
password only. It means BIPAC 6600 only checks the password even you enter characters in
the User Name field.
If you ever forget the password to log in, you may press the RESET button up to 2
seconds to restore the factory default settings.