Billion BIPAC 6600 Broadband Firewall Router
24
The Router Name, Domain Name and MAC Address fields are needed for some
ISPs. Please check it with your ISP. If you and your ISP do not know it, please
leave it as default.
PPPoE
PPPoE (PPP over Ethernet) is known as a dial-up DSL or cable service. It is designed to
integrate the broadband services into the current widely deployed, easy-to-use, and low-cost
dial-up-access networking infrastructure. Therefore, users can get greater access speed without
changing the operation concept, sharing the same ISP account and paying for one access
account. No PPPoE client software is required for local computer if you select this configuration.
Username:
Enter the username provided by your ISP. You can input up to
128
alphanumeric
characters (case sensitive).
Password:
Enter the password provided by your ISP. You can input up to
128
alphanumeric
characters (case sensitive).
NAT:
The NAT feature allows multiple users to access Internet through a single IP account,
sharing the single IP address. If users in the LAN site have public IP addresses and can access
Internet directly, the NAT function can be disabled.
Manual-on:
Check this button to establish your WAN connection manually by clicking
“
Release
” in “
3.4.1
Status
” section.
Always on:
Check this radio button if you want to establish a PPPoE session when starting up
the device. Please note that when you select this function, the device will not automatically re-
establish the PPPoE session when disconnected by ISP.
