Billion BIPAC 6600 Broadband Firewall Router
30
3.4.3.3.6 User Management
3.4.3.4 Firewall
User can decide to enable this firewall function including Packet Filtering, URL Filtering, MAC
Address Filtering, Intrusion Detection, and Block WAN Request features for better security
control or not. But be noted, it wastes network processor computation power. The performance
will be lower about 10% to 15%.
3.4.3.4.1 Packet Filtering
Packet filtering function enables you to configure your router to check specified internal/external
user (
IP address
) from Internet access, or you can disable specific service request (
Port
number
) to/from Internet. This configuration program allows you to set up different filter rules
up to 10 for different users based on their IP addresses or their network Port number. The
relationship among all filters is
“or”
operation, which means the device checks these different
filter rules one by one, stating from the first rule. As long as one of the rules is satisfied, the
specified action will be taken.
