Description:
A user-definable name for this connection.
VPI/VCI:
Enter the information provided by your ISP.
NAT:
The NAT (Network Address Translation) feature allows multiple users to access the
Internet through a single ISP account, sharing a single IP address. If users on your LAN
have public IP addresses and can access the Internet directly, the NAT function can be
disabled.
Username:
Enter the username provided by your ISP. You can input up to
128
alphanumeric characters (case sensitive). This is in the format of “username@ispname”
instead of simply “username”.
Password:
Enter the password provided by your ISP. You can input up to
128
alphanumeric characters (case sensitive).
Service Name:
This item is for identification purposes. If it is required, your ISP provides
you the information. Maximum input is
20
alphanumeric characters.
IP Address:
Your WAN IP address. Leave this at 0.0.0.0 to automatically obtain an IP
address from your ISP.
Authentication Protocol:
Default is
Chap.
Your ISP advises on using
Chap
or
Pap.
Connection:
Always on:
If you want the router to establish a PPPoE session when starting up
43
