VoIP/ 802.11g ADSL2+ Firewall Router
Chapter 4: Configuration
58
When using Virtual Servers your PCs will be exposed to the degree
specified in your Virtual Server settings provided the ports specified are
opened in your firewall packet filter settings.
Firewall and Access Control
Your router includes a full SPI (Stateful Packet Inspection) firewall for controlling Internet access from
your LAN, as well as helping to prevent attacks from hackers. In addition to this, when using NAT
(Network Address Translation. Please see the
WAN
configuration section for more details on NAT) the
router acts as a “natural” Internet firewall, as all PCs on your LAN will use private IP addresses that
cannot be directly accessed from the Internet.
Firewall
: Prevents access from outside your network. The router provides three levels of security
support:
NAT natural firewall
: This masks LAN users’ IP addresses which are invisible to outside users on the
Internet, making it much more difficult for a hacker to target a machine on your network. This natural
firewall is on when NAT function is enabled.
Firewall Security and Policy (General Settings)
: Inbound direction of Packet Filter rules to prevent
unauthorized computers or applications accessing your local network from the Internet.
Intrusion Detection
: Enable Intrusion Detection to detect, prevent and log malicious attacks.
Access Control
: Prevents access from PCs on your local network:
Firewall Security and Policy (General Settings)
: Outbound direction of Packet Filter rules to prevent
unauthorized computers or applications accessing the Internet.
URL Filter
: To block PCs on your local network from unwanted websites.
You can find six items under the
Firewall
section:
General Settings, Packet Filter, Intrusion Detection,
URL Filter
and
Firewall Log.
