VoIP/(802.11g) ADSL2+ Router
Chapter 2: Installing the router
The Rear Ports
3
1
6
5
The Ethernet Port # 4 can be used as a console port. You need a special
console tool which already includes in the package to connect with LAN
port 4 and PC’s RS-232 port (9-pin serial port).
8
7
4
2
Port
Meaning
1
Power Switch
Power ON/OFF switch
2
Power
Connect the supplied power adapter to this jack.
3
RESET
To be sure the device is being turned on press RESET
button for:
1-3 seconds
: quick reset the device.
6 seconds above, and power off, power on the device
:
restore to factory default settings. (Cannot login to the router
or forgot your Username/Password. Press the button for more
than 6 seconds).
Caution
: After pressing the RESET button for more than 6 seconds,
to be sure you power cycle the device again.
4
LAN
1X—4X
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
LAN ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
Caution
: Port 4 can be either a LAN or Console port at a time but not
both.
4
Console Port (as LAN port
4)
(RJ-45 connector)
Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to one of the
LAN ports when connecting to a PC or an office/home network
of 10Mbps or 100Mbps.
Caution
: Port 4 can be either a LAN or Console port at a time but not
both.
5
Phone
(RJ-11 connector)
Connect RJ-11 cable to this port when connecting to an analog
phone set.
6
LINE
(Router with LINE port only)
Connect RJ-11 cable to this port when connecting to the
telephone wall jack.
8
