99
Primary DNS / Secondary DNS:
Enter the IP addresses of the DNS servers. The DNS servers
are passed to the DHCP clients along with the IP address and the Netmask.
Connection:
Click on
Always on
to establish a PPPoE session during start up and to
automatically re-establish the PPPoE session when disconnected by the ISP. You may uncheck
the item to disable this function.
Idle Timeout:
Auto-disconnect the broadband firewall gateway when there is no activity on the line
for a predetermined period of time.
MTU:
Control the maximum Ethernet packet size your PC will send.
MAC Spoofing:
This option is required by some service Providers. You must fill the MAC address
specified by your service provider when this information is required. The default setting is set to
disable.
Summary of Contents for BiPAC 7800GZ
