57
WLAN
Wireless Parameters
WLAN Service:
Default setting is set to Enable. If you do not have any wireless, select Disable.
ESSID:
The ESSID is a unique name of a wireless access point (AP) used to distinguish one from
another. For security purpose, change the default wlan-ap to a unique ID name that is already
built into the router wireless interface. Make sure your wireless clients have exactly the ESSID as
the device in order to connect to your network.
Note: It is case sensitive and must not exceed 32 characters.
Hide ESSID:
It is used to broadcast its ESSID on the network so that when a wireless client
searches for a network, the router can be discovered and recognized. Default setting is Disable.
Enable:
Select Enable if you do not want broadcast your ESSID. When select Enable, the
ESSID will be hided in stead of broadcasting, thus when wireless client searches for this AP,
failure occurs. This ESSID (AP) will be invisible to you. In this case, if you want to join this
wireless network, enter the exactly ESSID manually and some security settings.
Disable:
When Disable is selected, the router will broadcast the ESSID to allow anybody with
a wireless client to be able to identify the Access Point (AP) of your router. Select the specific
ESSID scanned, with some security settings, you will join this wireless network.
Regulation Domain:
There are seven Regulation Domains for you to choose from, including
North America (N.America), Europe, France, etc. The Channel ID will be different based on this
setting.
Channel ID:
Select the wireless connection channel ID that you would like to use.
Note: Wireless performance may degrade if the selected channel ID is already being occupied
by other AP(s).
Security Parameters
Security Mode:
You can disable or enable the function with WPA or WEP to protect the wireless
network. The default mode of wireless security is Disable.
Click Apply to confirm the settings.
Summary of Contents for BiPAC 7800GZ
