56
Obtain DNS:
check whether to obtain DNS address automatically.
Primary/Secondary DNS:
if you uncheck Obtain DNS, then enter then primary/secondary DNS
address.
PPPoE Debug mode:
check whether to enable this function, it is used to debug PPPoE link, and the
debug message will be seen in
System log.
Bridge PPPoE Frame between WAN and Local Ports:
check whether to enable this function. It
allows PC in LAN to set up its own PPP link, or the PC will access internet via the PPP link in WAN
port.
IGMP Multicast Proxy:
check whether to enable this function. IGMP (Internet Group Management
Protocol) Proxy intercept the IGMP request from Clients and forward it to the router after some
dealings.
Click
Next
to go on to the Default Gateway setting.
Click
Next
to go on. Then you can view the information about your settings.
Summary of Contents for BiPAC 7800NEXL
