Billion BiPAC 8700VAX(L)-1600 User Manual Download

Page: 89 / 327

DHCPv6 Server Type:

Select Stateless or Stateful. When DHCPv6 is enabled, this parameter is

available.

Stateless:

If selected, the PCs in LAN are configured through RA mode, thus, the PCs in

LAN are configured through RA mode, to obtain the prefix message and generate an address using
a combination of locally available information (MAC address) and information (prefix) advertised by
routers, but they can obtain such information like DNS from DHCPv6 Server.

Stateful:

if selected,

the PCs in LAN will be configured like in IPv4 mode, thus obtain addresses and DNS information
from DHCPv6 server.

Start interface ID:

Enter the start interface ID. The IPv6 address composed of two parts, thus, the

prefix and the interface ID. Interface is like the Host ID compared to IPv4.

End interface ID:

Enter the end interface ID.

Note:

Interface ID does NOT support ZERO COMPRESSION "::". Please enter the complete

information.
For example: Please enter "0:0:0:2" instead of "::2".

Leased Time (hour):

The leased time, similar to leased time in DHCPv4, is a time limit assigned to

clients, when expires, the assigned ID will be recycled and reassigned.

Issue Router Advertisement:

Check whether to enable issue Router Advertisement feature. It is to

send Router Advertisement messages periodically.

ULA Prefix Advertisement:

Enable this parameter to include the ipv6 ULA address in the RA

messages. ULA, unique local address, is an IPv6 address in the block fc00::/7. It is approximately
the IPv6 counterpart of the IPv4 private address. They are not routable in the global IPv6 Internet.

RADVD Type:

The way that ULA prefix is generated.

Randomly

Generated

Statically Configured: select to set manually in the following parameters.

Prefix:

Set the prefix manually.

Preferred Life Time:

The ULA prefix life time. When the time is over, the ULA prefix is invalid any

more, -1 means no limit.

Valid Life Time:

It is a time threshold, when the time is over, clients should obtain new IPv6 address

from the router through RA; -1 means to be limitless.

MLD snooping:

Similar to IGMP snooping, listens in on the MLD conversation between hosts and

routers by processing MLD packets sent in a multicast network, and it analyzes all MLD packets
between hosts and the connected multicast routers in the network. Without MLD snooping, multicast
traffic is treated in the same manner as broadcast traffic - that is, it is forwarded to all ports. With
MLD snooping, multicast traffic of a group is only forwarded to ports that have members of that
group.

Standard Mode:

In standard mode, multicast traffic will flood to all bridge ports when no

client subscribes to a multicast group.

Blocking Mode:

In blocking mode, the multicast data will be blocked when there is no

client subscribes to a multicast group, it won’t flood to the bridge ports.

MLD LAN to LAN Multicast:

Check to determine whether to support LAN to LAN (Intra LAN)

Multicast. If user want to have a multicast data source on LAN side and he want to get MLD
snooping enabled, then this LAN-to-LAN multicast feature should be enabled