4. CLEANING & MAINTENANCE
4.1 Cleaning the Iron
4.2 Environment
4.3 Troubleshooting
• Disconnect the Iron from the mains supply outlet.
• Use a damped cloth or non-scratching cleaner to remove any deposits on the soleplate.
• Never use sharp & rough objects to remove the deposits on the soleplate
• Never use any abrasive, vinegar or descaling agents to clean the Iron.
• Do not dispose-off the appliance with the normal household waste, rather hand it over at an official collection point for recycling. By doing this, you help to preserve the
environment.
• This section summarizes the most common problems you may encounter with the appliance. If you are unable to solve the problem with the information below, please contact
the Consumer Care Centre.
The iron is plugged in but the soleplate is cold
1. There is connection Problem
2. The temperature dial is set to MIN
Check the mains cord the plug & the wall socket
Set the temperature dial to the required position
(See section “Setting the temperature” in
chapter “Using the appliance”)
Possible Cause
Solution
Problem
