Part No 500264
10
F091506B
BC2402 Series Brush Cutter Owner’s Manual
OPERATION
DO NOT
run engine in an enclosed area. Exhaust gases contain carbon monoxide, an
odorless and possibly fatal poison.
DO NOT
start or operate engine if strong odor of gasoline is present.
DO NOT
start or operate engine if gasoline is spilled. Move equipment away from spill
until gasoline has completely evaporated.
DO NOT
operate engine without a muffler. Inspect muffler periodically and replace if
necessary. If equipped with muffler deflector, inspect deflector periodically and replace
if necessary.
DO NOT
operate engine with grass, leaves or other combustible material near the
muffler.
DO NOT
touch muffler, cylinder or cooling fins while engine is running. Contact with hot
surfaces may cause severe burns.
DO NOT
operate equipment with bystanders in or near the work area.
DO NOT
operate equipment with guards removed.
DO NOT
operate equipment in areas containing rock, glass, string-like material, wire,
rags, cans, metal or other non-organic material.
DO NOT
operate
equipment on slopes greater than specified in Specifications section
of this manual.
DO NOT
operate
equipment near hot or burning debris or any toxic or explosive
materials.
DO NOT
allow children to operate this equipment.
ALWAYS
keep hands and feet away from moving or rotating parts.
ALWAYS
check before use, transportation, or storage to make sure the battery is
secured and straps holding battery are in good condition. If the strap breaks it will allow
the battery to shift and could cause a short damaging the equipment. (Electric start)
ALWAYS
connect battery terminals to proper connection cables. (Electric Start)
EAR PROTECTION
is recommended when operating this equipment.
EYE PROTECTION
is recommended when operating this equipment.
