Part No 501606
11
F041513B
BC2600 Euro Hydro Series Brush C
utter Owner’s Manual
B
LADE
R
EMOVAL AND
S
HARPENING
READ
all safety instructions before servicing unit.
Numbers in parenthesis (N) refers to the item number in Illustrated Parts List.
DISCONNECT
spark plug wire before servicing unit.
1. Disconnect spark plug wire.
2. Lift and support front of unit to allow access to underside.
UNIT IS HEAVY
. Make sure support is adequate to support weight of machine.
3. Block blade to prevent it from rotating during removal.
4. Remove blade nut (23), and friction washer (39).
5. Remove blade (40) and install replacement blade.
When replacing the blade use BILLY GOAT Industries PN 501224 only.
6. Attach new blade with new blade lock nut (23), and new friction washer (39) removed earlier included with your new
blade.
Inspect fasteners for wear and replace if necessary.
7. Torque blade lock nut to 30-40 ft-lbs.
8. Reconnect spark plug wire.
When sharpening blade make sure to sharpen all cutting edges. If the lock nut is removed and
replaced more than once, it should be replaced with a new lock nut (P/N 8160009).
