Part No 501606
13
F041513B
BC2600 Euro Hydro Series Brush C
utter Owner’s Manual
T
RANSAXLE
D
RIVE
B
ELT
R
EMOVAL AND
R
EPLACEMENT
READ
all safety instructions before servicing unit.
Numbers in parenthesis (N) refers to the item number in Illustrated Parts List.
DISCONNECT
spark plug wire before servicing unit.
1. Disconnect spark plug wire.
2. Lift and support the rear of the unit to allow access to the underside
3. Unattach the spring (item 50) from the bracket (item 98) that is keeping tension on the drive belt.
4. Walk the belt (item 121) off of the clutch (item 54) by slowly pulling the engine over.
WARNING:
use caution not
to pinch fingers between the belt and clutch.
5. Slip the belt off of the transaxle pulley.
6. Replace the belt in reverse order.
NOTE:
make sure the belt is seated properly in the clutch and transaxle and
make sure that it does not bend over the fan blades on the transaxle.
B
LADE
D
RIVE
B
ELT
R
EMOVAL AND
R
EPLACEMENT
READ
all safety instructions before servicing unit.
DISCONNECT
spark plug wire before servicing unit.
1. Disconnect spark plug wire.
2. Lift and support rear of unit to allow access to underside.
UNIT IS HEAVY
. Make sure support is adequate to support weight of machine.
