Part No 501606
9
F041513B
BC2600 Euro Hydro Series Brush C
utter Owner’s Manual
2. Pull Forward or Reverse Drive lever up to engage transaxle in desired direction.
Reverse Drive Lever (left hand) Forward Drive Lever (right hand)
D
ECK
H
EIGHT ADJUSTMENT
1.
To raise and lower the cutting height on the deck, pull the knob upwards and rotate the handle Clockwise to raise the
cutting height and counter-clockwise to lower the cutting height. DO NOT ADJUST HEIGHT WITH THE BLADE
RUNNING
S
HUT
D
OWN
1. Release drive lever to disengage transaxle.
2. Release blade clutch handle to disengage blade.
3. Move the throttle to the slowest possible position on the throttle control.
C
LEARING A
C
LOGGED
C
UTTING
D
ECK
1. Shut engine off and wait for blade to stop completely.
2. Disconnect spark plug wire.
3. Remove clog from cutting deck.
WEAR
durable gloves. Clog may contain sharp materials.
4. Reconnect spark plug wire.
DISCONNECT
spark plug wire before servicing unit.