BC26 HYDRO-DRIVE Operator’s Manual
Part No 501530
12
501530_B_HI
WIRING
DIAGRAMS
Starter Switch Wiring
Starter Circuit Schematic Diagram
Battery Care (For Electric-Starting Models)
Proper care can extend the life of a battery. Follow these recommendations to ensure your battery’s best performance and
long life:
DECREASE
INCREASE
STARTER
MOTOR
RED
RED
GREEN/
YELLOW
BLACK
BLACK
BATTERY
ENGINE
GROUND
STARTER
SOLENOID
ENGINE
GROUND
M
G
L
S
WHITE
RED
SWITCH
1.
Disconnect spark plug wire.
2.
Adjustments to cable tension are made at the barrel entering the Drive
Control Levers. (See
Fig. 13
)
3.
Adjust cable tension by tightening or loosening cable adjustment barrel
on rear of engine base (see below).
NOTE
: Moving the cable adjustment barrel OUT increases tension. Moving
the barrel IN decreases tension. Increasing the tension too much will cause
the drive to stay engaged whereas not enough will cause it not to engage
when the lever is pulled.
4.
Reconnect spark plug wire.
Fig. 13
NOT
FOR
REPRODUCTION
