382506_A_HI
11
Maintenance
SWING ARM BUSHING REPLACEMENT CONTINUED
3. Detach the tine plate. Use an impact/socket wrench fitted with the 1/2” socket to remove the four bolts
and associated hardware that secure the tine plate (see Figure C). Set hardware aside to be reattached
later. Using your hands, gently maneuver the plate down off of the tines (see Figure D). Set the plate aside
to reattach later.
4. Remove the swing arm (see Figure E, circled in blue). Use an impact/socket wrench fitted with a 9/16”
socket OR a 9/16” wrench to remove the bolt securing the swing arm. Repeat this step to detach the sec
-
ond swing arm.
Figure C
Figure D
Figure E
5. Remove the old and/or broken bushing from swing arm. Securely clamp down the swing arm. Use a
punch and hammer to tap out the old and/or broken bushing from the swing arm. See Figure F.
NOT
FOR
REPRODUCTION