Part No. 890034 Form No. F101000A
Page 3 of 12
PUT OIL IN ENGINE BEFORE STARTING
Read all safety and operating instructions
before assembling or starting this unit.
Debris Bag
890022 KD
890028 TKD
Check
These items should be included in your carton. If any
of these parts are missing, contact your dealer.
ASSEMBLY
PACKING CHECKLIST
Fig. 2
GENERAL SAFETY
For your safety and the safety of others, these directions should be followed:
Use of Ear Protection is recommended while
operating this machine.
Use of Eye and Breathing protection is recom-
mended when using this machine, especially in dry
and dusty conditions. Optional bag cover directs dust
toward ground, away from the operator.
·DO NOT
place hands or feet inside nozzle intake opening,
near debris outlet or near any moving parts.
·DO NOT
start engine without debris bag and quick discon-
nect connected firmly in place to exhaust outlet.
·DO NOT
start or operate machine with debris bag zipper
open.
Check
Tamper
(TKD MODELS ONLY)
890229
QUICK DISCONNECT
·DO NOT
operate during excessive vibration.
·DO NOT
remove bag until engine has been turned off and has
come to a complete stop.
·DO NOT
remove hose kit cap on nozzle until engine has been
turned off and has come to a complete stop.
·DO NOT
operate machine with hose cap, bag or hose removed.
·DO NOT
use this machine for vacuuming
exclusively
sand,
dust, fine dirt, rock, glass, string like material, grain, rags,
cans, metal, bark or water.
·DO NOT
operate this machine on slopes greater than 20%.
·DO NOT
pick up any hot or burning debris, or any toxic or
explosive material.
·DO NOT
allow children to operate this equipment.
9
10
11
Do not operate this machine without first reading
owner's manual and engine manufacturer's manual.
Your Billy Goat is shipped from the factory in one carton,
completely assembled except for the upper handle, debris
bag, and bag quick disconnect.
1.
ASSEMBLE
Lift upper handle (item 6), remove items 8, 73, 74, & 30
from lower handle (item 27). Attach upper and lower handle as shown,
and securely tighten folding handle knobs(item 73),while holding head of
screw(item 8) firmly against upper handle.
2.
UNFOLD
the debris bag (item 1) and fasten bag neck to bag quick
disconnect (item 83). Attach firmly to housing exhaust (item 52) see fig. 2.
3.
ATTACH
bag hanger strap to bag supports (item 11), preassembled to
upper handle.
4.
INSTALL
tamper (item 3) in chipper hopper (see page 7)(TKD ONLY).
5.
CONNECT
spark plug wire.
Literature
Assembly
Literature Assy
890423
Check
Check
Connector
Quick Disconnect
890176
Check
Briggs & Stratton
Engine
Manual
MS0986 Multi-Language
and 273125 English
1
32
30
64
8
3
