CS
N30
N30
Fix the small Cover Strip (
CS
) to the Door Gable Apex (
GA
) with 30mm nails (
N30
).
Tip: Blunt the nails points to help reduce wood splitting.
GA
S25
S25
MC
HA
Antique Handle is fixed
to outside of the door.
Fix a Door Block (
DB
) to the door frame with 50mm screws
(
S50
) and then fix a Magnetic Catch (
MC
)
to the Door Block (
DB
)
using 25mm screws (
S25
)
and it’s metal strip to the inside of the door with 10mm screws
(
S10
) so that it connects with the catch. Fix the Antique Handle (
HA
)
to the door with
25mm screws (
S25
) along the centre baton.
25
Metal Catch is fixed to
the inside of the door.
DB
S50
S50
S25
S25
HA
Antique Handle is fixed
to outside of the door.
Metal Catch is fixed to
the inside of the door.
S10
MC
S25
MC
26
27
S30
DSB
DSB
DG
DG
Fix a Door Safety Block (
DSB
)
to the Door Gable (
DG
) from the inside of the bulding using
30mm screws (
S30
).
The Door Safety Block (
DSB
) must be in line with the lower hinge on
the door. This block is to stop finger trapping when the door is fully open.
Tip: Pre-drill holes to help prevent splitting.
S30
OUTSIDE
INSIDE
HA
HA
FITTING RECOMENDED OPTIONS
Picket Fence
See stages 31-34
Finishing Base
See stages 29-30
N30
N30
N30
N30
N30
N30
N30
N30
N30
CS
CS
CS
Fix the Cover Strip (
CS
) to the the building where two panels meet and at the corners of
the building with 30mm nails (
N30
).
Tip: Blunt the nails points to help reduce wood splitting.
28
For Queries and Help please access our Support Centre: www.gardenbuildingsdirect.co.uk/help
