10
With the bowl in place, assemble the coupling. Hold it firmly by the upper side and fit it into
the axle, pushing it until it hits the end of the stroke. If you don't feel it tapping, it may not have been
fitted correctly. In this case, repeat the operation and if unsuccessful, contact technical assistance.
Mount the lid on the bowl so that the lock on the lid engages the lock pin on the bowl and
rotate the lid counterclockwise to lock it.
ATTENTION!
Never turn on the equipment with the coupling, bowl or lid out of position, as this could
cause accidents.
All parts must be assembled perfectly to ensure operator safety.
•
Operation
: The equipment can only be operated after checking that the bowl is correctly coupled
and firmly locked by the lockers, that the coupling is fitted as far as it will go, that the lid is mounted in
the correct position, that the blades are rotating correctly (counterclockwise), and that the voltage of
the equipment is in accordance with that of the mains supply.
After checking these items, follow the equipment operating procedures below:
• Connect the power cord to the electrical network;
