Binatone FBM-316, Instruction Manual

7

ENGLISH

2) Bubble massage with vibration and temperature

maintenance

The combined massage, vibration plus bubble effect with the

warm water relaxes and refreshes your feet, stimulating the blood
flow and enhancing the general condition of your body.

Attention:

 while using the bubble massage function, the

bath must always be filled with water.

3) Bubble massage with temperature maintenance

The combined effect of warm water and bubble massage gives

the sensation of being touched and you will feel a calming effect
on the nervous system as a whole. Air jets coming through the
small holes form bubbles which tenderly massage feet and skin
thus bringing pleasure and relaxation.

Temperature maintenance

This function provides water temperature maintenance during

the complete procedure (15-20 minutes). So before the start of a
massage session always fill the bath with water which has a com-
fortable temperature.

MAINTANCE AND CLEANING

1. Always switch off the appliance and unplug
it before you empty the water and clean the
appliance.
2. Pour the water out of the massager.
3. Thoroughly clean the interior surface of the
appliance with water and mild detergent, espe-
cially after using oils. Than dry the interior sur-
face.

4. If necessary remove and wash the detachable attachments

(4)

.

5. Thoroughly dry the appliance before storage.

DISPOSAL

The appliance should be disposed of in accor-

dance with waste disposal regulations in your coun-
try and with the least damage to the environment.

Only ecologically safe materials are used in

the packaging of our products and the cardboard
and paper can be disposed of with normal paper
waste.