KBF-LQC (E5.2) 12/2010
page 37/106
EVENT LIST
Overview over the last 16 events or error occur-
rences of the unit.
CHART RECORDER FUNCTION
Graphical display of the current temperature and
humidity, and light data, and review of the previous
measurements on a historical display. A memory
interval of 5s corresponds to a supervision period
of 2.5 days
6.3
Menu settings in the “User-settings” menu
User-settings
Instrument data
Contrast
Displ. Power down
Contin. operation
User Level
Safety control. Act + 39.8 °C
Safety control. Set. + 42.0 °C
29
Instrument data
Instrument Name
Enter an individual name of the climatic chamber.
Address
Enter a controller address (1 to 30) for operation with the communication
software APT-COM™.
All other entries are relevant only for service purposes.
Contrast
Adjust the contrast of the display according to the available ambient light to
obtain maximum readability.
Displ. power down
Switch off event
Do not change the entry “Wait. Period”.
Waiting period
You can enter a delay time after which the display, following manual activa-
tion, will automatically be turned off again, on condition that the moment is
outside the operation time defined in menu ”Contin. operation”.
Contin. operation
Enter an operation time to determine the period of display activity. Outside
the defined period, the display is automatically turned off. Pressing down any
key will reactivate the display. After the time set in menu “Displ. power down“,
the display will turn off again as far as the actual time is not within the opera-
tion time fixed in menu “Cont. operation“.
User Level
Toggle here to the display menu “User Level” (chap. 6.4) by entering a pass-
word. Factory default setting for this password is +00001. You can change
the password (“user code”) in the menu “User Level”.
08:43:55 15.12.09
08:43:55 15.12.09
