14
MPR180416 Rev. B
www.bindicator.com
Current Menu
Item Band
Menu Bar
Current Item
Number
Current Item
Program Mode Display: Navigation View
•
A visible menu bar indicates the menu list is too long to display all items.
•
The depth of the item band on the menu bar indicates the length of the menu list: a deeper band indicates fewer
items.
•
The position of the item band indicates the
approximate position of the current item in
the list. A band halfway down the menu bar
indicates the current item is halfway down
the list.
To enter into Program Mode, using the LDI buttons, press the RIGHT arrow key.
While the device is in Program Mode, the output remains active and continues to respond to changes in the device.
The unit will return to Measurement mode after a period of inactivitiy in Program Mode; set via Timeout Menu.
For a complete list of parameters, go to page XX.
Selecting an Option:
1. Navigate to the desired parameter using the menu and LDI buttons.
2. Press the RIGHT arrow key to open parameter view.
3. Press the RIGHT arrow key again to open the Edit mode. The current selection is highlighted; scroll to a new selection.
4. Press the RIGHT arrow key to accept it. The LCD returns to the parameter view and displays the new selection.
Changing a Numeric Value:
1. Navigate to the desired parameter.
2. Press the RIGHT arrow key to open parameter view. The current value is displayed.
3. Press the RIGHT arrow key again to epen the Edit mode. The current value is highlighted.
4. Use the arrow keys to edit the value.
UP and DOWN arrows will go through numbers 0 through 9 then (.), (#), and (>)
5. Continue to press the RIGHT arrow key to get the the far right to accept the value. The LCD returns to parameter view
and displays the new value.
