Page 5
Only use genuine BINKS replacement parts for Airless spray equipment!
The use of other than BINKS parts void all warranties !
In case you wish to apply unknown strong acids or aluminum corroding materials, we recommend
to contact your local distributor or our company to ensure safe operation.
Because any tool, if used improperly, can be dangerous, safety is ultimately the responsibility of
those who use it and those who operate the equipment. It is important that prior to installation the
user must read and be familiar with the Safety Section in the manual.
Always keep the Service Manual to hand.
Legal Requirements
For the operation with Airless Equipment and Accessories users must comply with the following
legal requirements:
BGV D 25 (VBG 23)
Processing of coating material
BGV D 15 (VBG 87)
Working with liquid jet stream equipment
ZH 1/406
Rules for jet stream equipment
Safeguards to be followed:
Do not point the gun at any person !
Do not point the gun at yourself, at any person, or at any animal.
Do not place any part of the body in the path of the spray !
Never touch the path of the spray with your fingers or your hand.
Secure the spray gun !
Always lock the gun before assembling or disassembling the tip or at operating interruptions.
Ensure no unintentional triggering may occur.