EN
77-2122-R13.1 (11/2015)
5 / 8
BINKS TWIST-TIP REVERSIBLE NOZZLE CLEANER
GENERAL
The Twist-Tip nozzle cleaner allows purging of a clogged nozzle orifice without
disassembly from the spray gun. The tungsten carbide nozzle is permanently
assembled into the rotatable cylinder tip insert and handle assembly. No alignment
or adjustments are required.
ASSEMBLY
Assembly to spray gun is simple and the exploded view is self-explanatory. The
54-2378 diffuser assembly is required to assemble the Twist-Tip into the gun.
FEATURES OF THE TWIST-TIP ATTACHMENT
• Fits most popular airless spray guns
• Low friction turning
• Equals or exceeds life of other reversible spray tips
• Hand-tightened seal system
• Assembly suitable for solvent and water-based
• Maximum working pressure: 7,500 PSI
• Rapid changing of the tip and base by hand without tools
IMPORTANT OPERATING INSTRUCTIONS
1. The spray gun must be shut off while rotating the Twist-Tip attachment handle.
2. If leakage occurs, unit must be disassembled, cleaned and parts checked for any
damage. Replace damaged parts with genuine Binks parts.
3. With proper care, the Twist-Tip attachment will give long, reliable
service. To maintain this performance, it should be flushed with
solvent or proper cleaning fluid following each spray period.
WARNING
Do not operate unit with leakage from the spray gun, Twist-
Tip attachment or hose or severe injury may result.
!
ITEM
NO. PART NO.
DESCRIPTION
QTY.
1
454-3
SAFETY GUARD
ASM
................. 1
1
454-5
SAFETY GUARD
(G Thread) ASM
... 1
2
454-1
SEAL KIT ASSEMBLY
(Part of Safety Guard)
.................. 1
3
454-Tip Size SPRAY TIP ............................... 1
4
54-2378
DIFFUSER ................................ 1
PARTS LIST
When ordering, please specify Part No.
SURFACE
COATING
FAN WIDTH
ORIFICE SIZE
(in inches)
.009
.011
.013
.015 .017
.019
.021
.023
Wood Interior
Stain, Sanding
6"
309
311
313
-
-
-
-
-
Cabinets, Paneling Sealer, Lacquer
Varnish, Shellac,
Enamels
Interior Walls
Latex, Vinyl
10"
-
-
-
515
517
519
-
-
Ceilings, Drywall
Acrylic
12"
-
-
-
615
617
-
-
-
Plaster
Overhang
Primers,
10"
-
-
- 515 517 -
-
-
Enamels
Masonry Block,
Vinyl, Acrylic
10"
-
-
-
-
517
519
521
-
Stucco, Concrete
Latex, Oil Base,
Alkyds
Wood Exterior
Exterior, Stains
10"
-
-
-
-
517
519
521
-
Shingle Siding,
Latex, Vinyl,
Shiplap Acrylic
Open Joist
MIL White
10"
-
-
-
-
-
519
-
-
Ceiling
Areas HI
Build
12" - - - - - -
521
523
AIRLESS TWIST TIP CHART
BASE RETAINERS
Assembly 454-3
454-5
Number
3/4 – 20
7/8 – 14 (G)
Binks
Graco, Titan, Wagner
Ordering: For twist tips add the prefix 454- to size tip selected.
For example, if you select 517, order as 454-517.
1
2
2
3
4
