Binks M1-G HVLP, User Manual

9

IMPORTANT REGULATORY NOTE

Some Regulatory Agencies prohibit the operation of HVLP spray guns above 10 psi nozzle atomizing
pressure. Users subject to this type of regulation should not exceed the gun inlet pressure indicated on
the air cap. See 

General Spray Instructions

and 

Air Pressure Recommendations

, page 8. It is recom-

mended that the nozzle test gauge (see below) be used to confirm actual nozzle operating pressure.

It may also be a requirement of some regulatory agencies that users have this gauge nozzle available on
site to verify that the gun is being operated within the limits of applicable rules.

AIR NOZZLE TEST GAUGE ASSEMBLY

54-3935 for 95P, 97P, 95AP, and 97AP Nozzles.
54-3908

◆

for 900 Series Nozzles.

54-4345

◆

for 90P Air Nozzle.

54-4356 for 93P Air Nozzle.
54-3902

◆

for 92P Air Nozzle.

54-4066

◆

for 94P Air Nozzle.

54-4566 for 96G Air Nozzle.

ACCESSORIES

(When ordering, please specify PART NO.)

Part No.

Description

54-4350

Gun Stand

54-4352

Gun Bracket

192219

Plastic Coated Gun Hook

81-82

Strainer

145 Mesh—typical for Lacquers

81-83

Strainer

100 Mesh—typical for Metal Flake

81-84

Strainer

80 Mesh—typical for Primers

54-4352 

Gun Bracket 

(Optional)

54-4350

Gun Stand

(Optional)

59-299
Gauge

◆

◆

Available from Industrial
Distributors only.

192219 

Plastic Coated Gun Hook 

(Supplied with outfit)