In the System Administration-> Global Settings ->System menu, Communication with
the NetManager is
. The address of the Cloud NetManager is preconfigured
in the NetManager IP address field. If you want to run your own management system, you
need to enter the address of your server here.
Step-by-step instructions for the most important configuration tasks can be found in the
separate Application Workshop guide for each application, which can be downloaded
from our web site.
GUI Call up
Start the configuration interface as follows:
(a) Enter the IP address of your device in the address line of your Web browser.
With DHCP server:
• the IP address that the DHCP server assigned to your device
Without DHCP server:
• With direct connection to the configuration PC: the fallback IP address
(b) Enter
in the User field and
in the Password field.
(c) Click LOGIN in order to get to the configuration interface.
2.5 Modify system password
All bintec elmeg devices are delivered with the same username and password. As long as
the password remains unchanged, they are therefore not protected against unauthorised
use. Make sure you change the passwords to prevent unauthorised access to your device!
Proceed as follows:
(a) Go to the System Management->Global Settings->Passwords menu.
(b) Enter a new password for System Admin Password .
(c) Enter the new password again under Confirm Admin Password .
(d) Click OK.
(e) Store the configuration using the Save configuration button above the menu naviga-
tion.
Note the following rules on password use:
• The password must not be easy to guess. Names, car registration numbers, dates of
2 Basic configuration
bintec elmeg GmbH
14
W2022ac, W2022ac-ext
