C
ONFIGURATION
23
ing a transfer network, enter the IP Network address and
netmask
1
for your WAN Partner.
Select [SAVE] twice, and then [EXIT] to return to Setup
Tool’s main menu.
IP Configuration
From the main menu select [IP]. From the submenus
which are displayed select [Routing]. This menu displays
a list of routes known to the BRICK. Initially, the list will
be empty. Select [ADD] to create a new default route. Your
display will be similar to the menu shown below.
In the Route Type field, select “Default route”.
In the Network field select the appropriate entry (using
the spacebar) to specify whether the default route should
be over the LAN or WAN. For WAN routes, select the ap-
propriate entry depending on whether you are using a
transfer network.
In the Partner / Interface field select the partner name
the default route leads to. For our example, we added a
1.
If you are using a standard netmask (e.g. 255.255.255.0), you can
leave this field empty.
BIANCA/BRICK-XM Setup Tool
BinTec Communications AG
[WAN][ADD][IP]: IP Configuration (partnerbrick)
mybrick
IP Transit Network
no
Partner’s LAN IP Address
200.1.1.0
Partner’s LAN Netmask
255.255.255.0
SAVE
CANCEL
Enter IP address (a.b.c.d or resolvable hostname)
Summary of Contents for BIANCA/BRICK-XM
Page 1: ...BIANCA BRICK XM Getting Started Version 1 6 July 1999 Document 71020E...
Page 2: ......
Page 36: ...BIANCA BRICK XM 30...
