BIANCA/BRICK-XM
24
default route without a transfer network to partnerbrick
via ISDN.
Then select [SAVE] and then [EXIT] until you return
to the main menu.
Your configuration is almost complete. Now proceed
to the section Saving your Configuration on page 27.
Leased Line
If you connected your BRICK to an ISDN leased line, the
WAN Interface submenu will appear similar to the fol-
lowing except that the ISDN Switch Type field will display
“autodetect on bootup” and each of the channel fields will
be set as “dialup” channels.
To configure the BRICK’s ISDN interface for use with
a leased line you will need to set the ISDN Switch Type,
and D and B channel fields manually.
Scroll through the entries in the ISDN Switch Type field
and select the entry for the number or channels your ISDN
line uses. Upon exiting this field the cursor will jump to
the first channel used. For each channel used, specify
which mode the channel should operate in.
BIANCA/BRICK-XM Setup Tool
BinTec Communications AG
[IP][ROUTING][ADD]: Confuigure IP Routes
mybrick
Route Type
Default route
Network
WAN without transit network
Partner / Interface
partnerbrick
Metric
1
SAVE
CANCEL
Use <Space> to select
Summary of Contents for BIANCA/BRICK-XM
Page 1: ...BIANCA BRICK XM Getting Started Version 1 6 July 1999 Document 71020E...
Page 2: ......
Page 36: ...BIANCA BRICK XM 30...
