Field
Description
If a time server is configured, the time is only determined over
ISDN until a successful update is received from this time server.
Updating over ISDN is deactivated for the period in which the
time is determined by means of a time server.
The function is activated with
;
.
The function is enabled by default.
First Timeserver
Enter the primary time server, by using either a domain name or
an IP address.
In addition, select the protocol for the time server request.
Possible values:
•
"5
(default value): This server uses the simple network
time protocol via UDP port 123.
•
$63 / !5
: This server uses the Time service
with UDP port 37.
•
$63 / 5
: This server uses the Time service
with TCP port 37.
•
"
: This time server is not currently used for the time re-
quest.
Ex works, the
.*-* *
server is entered
here.
Second Timeserver
Enter the secondary time server, by using either a domain name
or an IP address.
In addition, select the protocol for the time server request.
Possible values:
•
"5
(default value): This server uses the simple network
time protocol via UDP port 123.
•
$63 / !5
: This server uses the Time service
with UDP port 37.
•
$63 / 5
: This server uses the Time service
with TCP port 37.
•
"
: This time server is not currently used for the time re-
quest.
11 System Management
bintec elmeg GmbH
86
elmeg hybird 120 / hybird 130
