Field
Description
Block Time
Enter the time in seconds for which the status of the current
server shall remain blocked.
When the block has ended, the server is set to the status spe-
cified in the Entry active field.
The possible values are
to
+
, the default value is
+
. The
value
means that the server is never set to
9 3E
status
and thus no other servers are queried.
Encryption
Select whether data exchange between the server
and the NAS is to be encrypted with MD5.
The function is activated by selecting
;
.
The function is enabled by default.
If the function is not enabled, the packets and all related inform-
ation are transferred unencrypted. Unencrypted transfer is not
recommended as a default setting and should only be used for
debugging.
11.6.3 Options
This setting possible here causes your device to carry out authentication negotiation for in-
coming calls, if it cannot identify the calling party number (e.g. because the remote terminal
does not signal the calling party number). If the data (password, partner PPP ID) obtained
by executing the authentication protocol is the same as the data of a listed remote terminal
or RADIUS user, your device accepts the incoming call.
Fig. 47:
System Management
->
Remote Authentication
->
Options
The menu System Management->Remote Authentication->Options consists of the fol-
lowing fields:
bintec elmeg GmbH
11 System Management
elmeg hybird 120 / hybird 130
115
