Field
Description
•
'==
(default value): The caller's number is not displayed to
the person called.
•
L
: The data is sent as DTMF.
Receive charges
Select whether your device is to receive charge information
from the network. For this purpose, you can define the charge
impulse at 12 kHz or 16 kHz.
Possible values:
•
'==
(default value) Charge information is not received.
•
E(H
•
+ E(H
Fields in the Advanced Settings menu.
Field
Description
Busy Tone Detection
Select whether Busy Tone Detection should be used.
The function is activated by selecting
;
.
The function is enabled by default.
Dial Tone Detection
Select whether Dial Tone Detection should be used.
The function is activated by selecting
;
.
The function is enabled by default.
If the Dial Tone Detection is enabled and the external dial tone
has been recognised, your hybird 120 / hybird 130 immedi-
ately starts to dial.
Dial Tone Pause
Only for Dial Tone Detection disabled.
Enter the value you want which the system is to wait for, as a
maximum, when dialling a telephone number, before it begins
dialling.
You can switch on the Dial Tone Pause if the hybird 120 / hy-
bird 130 fails to recognise the external dial tone or if no dial
tone is being sent. You must decide the duration of the Dial
Tone Pause .
12 Physical Interfaces
bintec elmeg GmbH
146
elmeg hybird 120 / hybird 130
