Field
Description
Through Network Address Translators (NATs)
A STUN server is required to allow VoIP devices access to the
internet behind an active NAT. This determines the current pub-
lic IP address for the connection, which is used for precise re-
mote addressing.
Maximum number of characters: 32.
Port STUN server
Enter the number of the port to be used for the connection to
the STUN server.
The default value is
2,
. A 5 digit sequence is possible.
Fields in the Timer menu.
Field
Description
Registration Timer
Enter the time in seconds within which the SIP client must re-
register to prevent the connection from disconnecting automat-
ically.
The default value is
+
.
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu.
Field
Description
Proxy
Enter the DNS name or IP address of the SIP server. A 26 digit
alpha-numeric sequence is possible.
Proxy Port
Enter the number of the port to be used for the connection to
the proxy. The default value is
)+
. A 5 digit sequence is pos-
sible.
Transport Protocol
Select the transport protocol for the connection.
Possible values:
•
!5
(default value)
•
5
Fields in the Further Settings menu
13 VoIP
bintec elmeg GmbH
158
elmeg hybird 120 / hybird 130
